There is always a list of dos and don’ts when you want to do things properly. It takes a lot of time when it comes to choosing and working on a range of stainless steel fasteners. There are many different things that you need to consider before buying nuts, screws, and other types of fasteners. If you want to know what you should and shouldn’t do to avoid some common mistakes, then here we have rounded up some basic tips for you to consider. 

> You must first choose the right stainless steel grade for your application. Make sure you use fasteners in the environment and consider which ingredients or chemicals you will come in contact with. Lubricate all stainless steel binding threads to avoid potential violence. Top stainless fastener engineers will always recommend that all stainless steel threads be lubricated before assembling.

> Thicken the chromium oxide layer in the fastener to improve corrosion resistance. This can be done electronically- polishing the fastener.

> There are different grades of stainless steel. However, the highest grades are 304 and 316. Though 316 is prone to corrosion.

> Always select the correct surface finish. Smooth polished finish, good for corrosion resistance. While some products have stains or roughly brushed finishes, this type of finish can trap minute particles. This can also damage the protective chromium oxide layer of steel.

> Stainless steel naturally prevents corrosion due to its protective layer. Contaminants remain fixed on the stainless steel depending on the surface finish, these can damage this protective layer, causing an oxygen reaction with the iron.

> It is important to know that stainless steel is not completely non-magnetic. In situations where the non-magnetic quality of a material is critical, stainless steel is not a proper recommended choice.

> Stainless steel and aluminum are two different types of metals. Because these metals are attached and an electron such as saltwater is initiated, a transfer of electrons occurs resulting in loss of the integrity of the galvanic corrosion elements. To avoid this situation use some rubber components or do not use them together.

> A fastener is available in thick, fine, or super-fine fine threading depending on the diameter of the tie. Nuts and washers, on the other hand, are shaped to fit screws or bolts and vary in the outer diameter of different washer patterns.

> Stainless steel can be a bit more complicated than you think. Stainless steel fasteners are still a great choice in many situations.

> Choosing the right material for fasteners is not only important when considering costs, but also more important when considering factors such as strength, brittleness, and corrosion resistance.

> You need to check how much nickel and manganese content the fastener has. Low nickel as well as high manganese content is of inferior quality and rust.

We hope these steps will help you. Stainless steel is a highly used metal. So before buying stainless steel fasteners follow these simple helpful tips to avoid any mistake and choose the proper material as well as grade.