Bolts

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

When selecting a nut to be used for a graded hex cap screw, keep in mind that the nut should have the same grade as the bolt/screw. For instance, a Grade 5 Hex Cap Screw should only utilize a Grade 5 hex nut

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1
Plain steel surface (no finish or coatings) will corrode in wet environments
Meets ASME B18.2.1 and SAE J429 specifications
These are PARTIALLY Threaded Bolts with a minium of 3.25 inches of thread
Head Height: 29/32 in. / Width Across the Flats: 2-1/16 in.

Used in products that require general atmospheric corrosion resistance, such as chemical and food processing dquipment

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

When selecting a nut to be used for a graded hex cap screw, keep in mind that the nut should have the same grade as the bolt/screw. For instance, a Grade 5 Hex Cap Screw should only utilize a Grade 5 hex nut

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1
Plain steel surface (no finish or coatings) will corrode in wet environments
Meets ASME B18.2.1 and SAE J429 specifications
These are PARTIALLY Threaded Bolts with a minium of 3 inches of thread
Head Height: 29/32 in. / Width Across the Flats: 2-1/16 in.

When selecting a nut to be used for a graded hex cap screw, keep in mind that the nut should have the same grade as the bolt/screw. For instance, a Grade 5 Hex Cap Screw should only utilize a Grade 5 hex nut

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1
Plain steel surface (no finish or coatings) will corrode in wet environments
Meets ASME B18.2.1 and SAE J429 specifications
These are PARTIALLY Threaded Bolts with a minium of 3.25 inches of thread
Head Height: 29/32 in. / Width Across the Flats: 2-1/16 in.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications.

When selecting a nut to be used for a graded hex cap screw, keep in mind that the nut should have the same grade as the bolt/screw. For instance, a Grade 5 Hex Cap Screw should only utilize a Grade 5 hex nut

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1
Plain steel surface (no finish or coatings) will corrode in wet environments
Meets ASME B18.2.1 and SAE J429 specifications
These are PARTIALLY Threaded Bolts with a minium of 3.25 inches of thread
Head Height: 29/32 in. / Width Across the Flats: 2-1/16 in.

When selecting a nut to be used for a graded hex cap screw, keep in mind that the nut should have the same grade as the bolt/screw. For instance, a Grade 5 Hex Cap Screw should only utilize a Grade 5 hex nut