Nuts

Across the Flats: 1" inches
Also referred to as Rod Couplings
The length of the nut is 2.5D where D equals the basic major thread diamter.

Across the Flats: 1" inches
Also referred to as Rod Couplings
The length of the nut is 2.5D where D equals the basic major thread diamter.

Thread Size: 3/4"-10

Exceptional strength in low height nut because all threads are load-carrying.
Combines ruggedness with space savings.
The Light hex stlye has about 20% less weight and 30% less height for compact or

Designed for use with square bolts

Designed for use with square bolts

Slotted Hex Nuts - Finished Patter
The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener

Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened agianst the jam to keep it from loosening

Across the Flats: 1" inches
Also referred to as Rod Couplings
The length of the nut is 2.5D where D equals the basic major thread diamter.

Nylon Insert Stop Nuts
Light Hex, Standard Height (NM & NE Series)
Proof Load: 90,000 psi
Steel Zinc Plated
Also known as: Nylon Insert Stop Nuts, Nylock Nuts, Elastic Lock Nuts, Elastic Stop Nuts

Steel nylon insert stop nuts are less expensive than grade-C automation lock nuts.
Thin pattern nylon insert nuts are intended for use in limited clearance applications and not for bearing purposes.
Also known as: Nylon Insert Stop Nuts, Nylock Nuts, Elastic Lock Nuts, Elastic Stop Nuts

Has greater surface area than NM-series nuts, making wrenching easier.
Deisgned to be used with cap screws which have a minimum tensile strength not greater than 90,000 pcs.
Used in bridge and building construction, material handling, heavy equipment and field machinery.
Steel nylon insert stop nuts are less expensive than grade-C automation lock nuts.
Nylon insert locknuts are not designed to be used in temperatures over 250 degrees fahrenheit

A double chamfered Grade 8 Finished Hex Nut

A double chamfered Grade 8 Finished Hex Nut

Finished Hex Nuts, Low Carbon
Low Carbon Steel with a Zinc Protective Coating
Manufactured to ASME B18.2.2 & SAE J995 Specifcations

To bu used with A307 Bolts

Finished Hex Nuts, Low Carbon
Low Carbon Steel with a Zinc Yellow Protective Coating
Manufactured to ASME B18.2.2 & SAE J995 Specifcations

To bu used with A307 Bolts

Finished Hex Nuts, Low Carbon
Low Carbon Steel with a Hot Dip Galvanic Coating - Hot-Dip Galvanized
Manufactured to ASME B18.2.2 & SAE J995 Specifcations

To bu used with A307 Bolts