Nuts

Thread Diameter-Pitch: M3-0.50
Width Across the Flats: 5.5mm
Height/Thickness: 2.4mm
A Style 1, heat treated fastener with a metric thread pitch. Class 6 nuts are to be used with screws and bolts of property class 6.8 or lower.
Material: Metric Class 6 Steel with a Zinc Plated

Wing Nuts, Cold Forged
Steel Zinc Plated

External Lockwasher

External Lockwasher

Self Clinching Nuts
Can be installed into metals of Rockwell Hardness of B80 max.
Case Hardened Steel Zinc Plated & Baked

Self Clinching Nuts
Can be installed into metals of Rockwell Hardness of B80 max.
Case Hardened Steel Zinc Plated & Baked

Self Clinching Nuts
Can be installed into metals of Rockwell Hardness of B80 max.
Case Hardened Steel Zinc Plated & Baked

DIN 985 Nylon Insert Stop Nuts
Property class 8 Steel
Proof Load: 800 N/mm2
Coarse Thread
Black Oxide & Oiled

DIN 985 Nylon Insert Stop Nuts
A4 Class 50 Stainless Steel
Coarse Thread

DIN 985 Nylon Insert Stop Nuts
18-8 Stainless Steel
Coarse Thread

DIN 985 Nylon Insert Stop Nuts
Property class 8 Steel
Proof Load: 800 N/mm2
Coarse Thread
Zinc Plated

DIN 934 Hex Nuts
Class 50
Property Class 50
A4 Stainless Steel

DIN 934 Hex Nuts
Class 6, Style 1
Class 6 (M2 thru M3 diam)
Steel (Class 8 contains some Manganese)
Zinc Plated

DIN 934 Hex Nuts
Class 50
Property Class 50
Black oxide over 18-8 Stainless Steel

DIN 934 Hex Nuts
Class 50
Property Class 50
18-8 Stainless Steel

DIN 934 Hex Nuts
Class 10, Style 1
Heat Treated Steel, Quenched and Tempered
Hardness: Rockwell C26 -36
Coarse Thread

DIN 971
Low Type Hex Cap Nut
Low Crown Acorn Nut
A2 Stainless Steel
Flat Top Closed End

DIN 6923 Serrated Hex Flange Nuts
Class 8
Property Class 8 Steel
Hardness: Rockwell B91.5

DIN 6923 Serrated Hex Flange Nuts
Class 50
Property Class 50
A2 Stainless Steel
Tensile Strength: 72,500 psi.

DIN 6923 Hex Flange Nuts
Class 50
Property Class A4-50
316 Stainless Steel
Tensile Strength: 72,500 psi.