Pins

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 3"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 2.500" (2-1/2")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 2.250" (2-1/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 2"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1.750" (1-3/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1.500" (1-1/2")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1.250" (1-1/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 0.750" (3/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 3"
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 2.500" (2-1/2")
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 2.250" (2-1/4")
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 2"
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1.750" (1-3/4")
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1.500" (1-1/2")
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1.250" (1-1/4")
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 1"
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.312" (5/16") / #10-32 Interal Thread
Length: 0.750" (3/4")
Featuring a flat vent to release trapped air, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Flat Vent Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Diameter: 0.312" (5/16") / #10-32 Internal Thread
Length: 2.250" (2-1/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Spiral Groove Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw. Spiral grooves allow trapped air to be released.
Heat Treated Alloy Steel Hardened

Diameter: 0.312" (5/16") / #10-32 Internal Thread
Length: 1.750" (1-3/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Spiral Groove Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw. Spiral grooves allow trapped air to be released.
Heat Treated Alloy Steel Hardened