Pins

Diameter: 0.078" (5/64")
Length: 1"
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.875" (7/8")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.750" (3/4")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.687" (11/16")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.625" (5/8")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.562" (9/16")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.500" (1/2")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.437" (7/16")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.312" (5/16")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.250" (1/4")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 0.187" (3/16")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.078" (5/64")
Length: 1"
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.875" (7/8")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.750" (3/4")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.687" (11/16")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.625" (5/8")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.562" (9/16")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.500" (1/2")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.437" (7/16")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.078" (5/64")
Length: 0.375" (3/8")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel