Pins

Diameter: 0.625" (5/8")
Length: 1.500" (1-1/2")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.625" (5/8")
Length: 1.250" (1-1/4")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.625" (5/8")
Length: 1"
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.625" (5/8")
Length: 6"
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 5"
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 3.500" (3-1/2")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 3"
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 2.500" (2-1/2")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 1.750" (1-3/4")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 1.500" (1-1/2")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 1.250" (1-1/4")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.625" (5/8")
Length: 6"
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 5.750" (5-3/4")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 5.500" (5-1/2")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 5.250" (5-1/4")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 5"
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 4.500" (4-1/2")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 4"
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 3.750" (3-3/4")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel

Diameter: 0.625" (5/8")
Length: 3.500" (3-1/2")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel