
Pins
- 7/64 x 3/8" Dowel Pins / Alloy Steel / Bright Finish (Quantity: 100 pcs)Diameter: 0.109" (7/64")
Length: 0.375" (3/8")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel7/64 x 1/2" Dowel Pins / Alloy Steel / Bright Finish (Quantity: 100 pcs)Diameter: 0.109" (7/64")
Length: 0.500" (1/2")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel7/64 x 5/8" Dowel Pins / Alloy Steel / Bright Finish (Quantity: 100 pcs)Diameter: 0.109" (7/64")
Length: 0.625" (5/8")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel7/64 x 3/4" Dowel Pins / Alloy Steel / Bright Finish (Quantity: 100 pcs)Diameter: 0.109" (7/64")
Length: 0.750" (3/4")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel7/64 x 1" Dowel Pins / Alloy Steel / Bright Finish (Quantity: 100 pcs)Diameter: 0.109" (7/64")
Length: 1"
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steel7/64 x 1 1/2" Dowel Pins / Alloy Steel / Bright Finish (Quantity: 100 pcs)Diameter: 0.109" (7/64")
Length: 1.500" (1-1/2")
This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Heat Treated Alloy Steeltest desc