Screws

Thread Diameter - Pitch: #12-24
Length: 1 1/2"
Has six flat sides, and a flat bearing surface. Preferred in high volume assembly where pneumatic equipment is used to drive the screw.

Self Drilling Screws featuring an Unslotted drive
#5 Drill Point - Non-Walking, Cutting Edges
Designed to drill through a greater thickness of steel than a standard self driller

Self Drilling Screws featuring an Unslotted drive
#4 Point
Thread Size - Pitch: #12-24

Self Drilling Screws featuring an Unslotted drive
#5 Drill Point - Non-Walking, Cutting Edges
Designed to drill through a greater thickness of steel than a standard self driller

Self Drilling Screws featuring an Unslotted drive
#5 Drill Point - Non-Walking, Cutting Edges
Designed to drill through a greater thickness of steel than a standard self driller

Thread Diameter - Pitch: #12-24
Length: 3/8"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 1/2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 5/8"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 3/4"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 1"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 1 1/4"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 1 1/2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 2 1/2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 3"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #12-24
Length: 1/4"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #12-24
Length: 3/8"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #12-24
Length: 1/2"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #12-24
Length: 5/8"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #12-24
Length: 3/4"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.