Nuts
1 5/8-5.5 Heavy Hex Nuts / A563 Grade A / Hot Dip Galvanized (Quantity: 30 pcs)To bu used with A307 Bolts
1 5/8-5.5 Heavy Hex Nuts / A563 Grade A / Zinc (Quantity: 30 pcs)To bu used with A307 Bolts
1 5/8-5.5 Finished Hex Nuts / Grade 2 Steel / Zinc (Quantity: 45)Finished Hex Nuts, Low Carbon
Low Carbon Steel with a Zinc Protective Coating
Manufactured to ASME B18.2.2 & SAE J995 Specifcations
1 5/8-5.5 Finished Hex Nuts / Grade 2 Steel / Plain (Quantity: 45)Finished Hex Nuts, Low Carbon
Low Carbon Steel with a Plain Finish
Manufactured to ASME B18.2.2 & SAE J995 Specifcations 1 5/8-5.5 Heavy Hex Nuts / Steel / Hot Dip Galvanized (Quantity: 20 pcs)Heavy Hex Nuts
Tapped Oversized
Manufactured to ASME B18.2.2 & SAE J995 specifications
Proof Load: 75,000 psi
Coarse Thread 1 5/8"-5 1/2 Heavy Hex Nut / A563 Grade A Steel / Hot Dip Galvanized (Quantity: 30 pcs)To be used with A307 Bolts
Heavy Hex Carbon Steel A563 Grade A
Thread Size-Pitch: 1 5/8"-5 1/2
Width Across the Flats: 2 9/16"
Thickness/Height: 1 19/32" 1 5/8"-5 1/2 Heavy Hex Nut / A563 Grade A Steel / Zinc Plated (Quantity: 30 pcs)To be used with A307 Bolts
Heavy Hex Carbon Steel A563 Grade A
Thread Size-Pitch: 1 5/8"-5 1/2
Width Across the Flats: 2 9/16"
Thickness/Height: 1 19/32" 1 5/8"-5 1/2 Nylon Insert Locknut Heavy (NU) / Grade A Steel / Zinc Plated (Quantity: 22) Heavy Hex, Full HeightHas greater surface area than NM-series nuts, making wrenching easier.
Deisgned to be used with cap screws which have a minimum tensile strength not greater than 90,000 pcs.
Used in bridge and building construction, material handling, heavy equipment and field machinery.
NU Series (Heavy Hex, Full Height)
Nylon insert locknuts are not designed to be used in temperatures over 250 degrees fahrenheit 1 5/8"-5 1/2 Heavy Hex Jam (Thin) Nuts / A563 Grade A Steel / Zinc Plated (Quantity: 50 pcs)Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened agianst the jam to keep it from loosening
Thread Diameter-Pitch: 1 5/8"-5 1/2
Width Across the Flats: 1 5/8"-5 1/2 inches
Height/Thickness: 2 9/16" inches
Manufactured to ASME B18.2.2 & SAE J995 specifications 1 5/8"-5 1/2 Heavy Hex Jam (Thin) Nuts / A563 Grade A Steel / Plain (Quantity: 40 pcs)Jam nuts are tightened against the work surface and a finished or heavy hex nut is tightened agianst the jam to keep it from loosening
Thread Diameter-Pitch: 1 5/8"-5 1/2
Width Across the Flats: 1 5/8"-5 1/2 inches
Height/Thickness: 2 9/16" inches
Manufactured to ASME B18.2.2 & SAE J995 specifications 1 5/8"-5 1/2 Finished Hex Nuts / Grade 2 Steel / Zinc Plated (Quantity: 45)Thread Diameter-Pitch: 1 5/8"-5 1/2 inches
Width Across the Flats: 2-7/16 inches
Thickness/Height: 1-25/64 inches
Double Chamfered Finished Hex Nuts
Manufactured to ASME B18.2.2 & SAE J995 Specifcations 1 5/8"-5 1/2 Heavy Hex Nut / A563 Grade A Steel / Plain (Quantity: 30 pcs)To be used with A307 Bolts
Heavy Hex Carbon Steel A563 Grade A
Thread Size-Pitch: 1 5/8"-5 1/2
Width Across the Flats: 2 9/16"
Thickness/Height: 1 19/32" 1 5/8"-5 1/2 Finished Hex Nuts / Grade 2 Steel / Plain Finish (Quantity: 45)Thread Diameter-Pitch: 1 5/8"-5 1/2 inches
Width Across the Flats: 2-7/16 inches
Thickness/Height: 1-25/64 inches
Double Chamfered Finished Hex Nuts
Manufactured to ASME B18.2.2 & SAE J995 Specifcations 1 5/8"-5 1/2 Heavy Hex Nut / A194 2H Steel / Plain (Quantity: 25 pcs)Grade 2H nuts are recommended for use with bolts in high-pressure and high-temperature service. Grade 2H nuts are are heat treated by quenching in a liquid medium from a temp above the transformation temp
Rockwell C24 - C38 / 150,000 psi proof load
Thread Size-Pitch: 1 5/8"-5 1/2
Width Across the Flats: 2 9/16"
Thickness/Height: 1 19/32" 1 5/8"-5 1/2 Heavy Hex Nut / A194 2H Steel / Hot Dip Galvanized (Quantity: 25 pcs)Grade 2H nuts are recommended for use with bolts in high-pressure and high-temperature service. Grade 2H nuts are are heat treated by quenching in a liquid medium from a temp above the transformation temp
Rockwell C24 - C38 / 150,000 psi proof load / Hot dip galvanizing is generally the most effective way to apply a sufficient thickness of zinc to threaded fasteners for zinc to serve as a corrosion protection in harsh enviroments.
Thread Size-Pitch: 1 5/8"-5 1/2
Width Across the Flats: 2 9/16"
Thickness/Height: 1 19/32" 1 5/8"-5 1/2 Finished Hex Nuts / Grade 2 Steel / Plain Finish (Quantity: 10)Thread Diameter-Pitch: 1 5/8"-5 1/2 inches
Width Across the Flats: 2-7/16 inches
Thickness/Height: 1-25/64 inches
Double Chamfered Finished Hex Nuts
Manufactured to ASME B18.2.2 & SAE J995 Specifcations
