Pins

Dowel Diameter: 0.750" (3/4") / 5/16-18 Interal Thread
Length: 3"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 4"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 3"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 2.500" (2-1/2")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 2.250" (2-1/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 2"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 1.750" (1-3/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 1.500" (1-1/2")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.500" (1/2") / 1/4-20 Interal Thread
Length: 1.250" (1-1/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.437" (7/16") / 1/4-20 Interal Thread
Length: 2"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.437" (7/16") / 1/4-20 Interal Thread
Length: 1.500" (1-1/2")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.437" (7/16") / 1/4-20 Interal Thread
Length: 1"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 3"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 2.500" (2-1/2")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 2.250" (2-1/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 2"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 1.750" (1-3/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 1.500" (1-1/2")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 1.250" (1-1/4")
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened

Dowel Diameter: 0.375" (3/8") / #10-32 Interal Thread
Length: 1"
Precision ground, these pin have a diameter tolerance of +0.0001" ~ +0.0003".
Standard Round Alloy Steel Pull Out Dowel Pins: These pins are internally threaded on one end and can be pulled out with a screw.
Heat Treated Alloy Steel Hardened