Pins

Diameter: 0.062" (1/16")
Length: 2"
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 1.750" (1-3/4")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 1.500" (1-1/2")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 1.250" (1-1/4")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 1"
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.875" (7/8")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.750" (3/4")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.625" (5/8")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.563" (9/16")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.500" (1/2")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.437" (7/16")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.375" (3/8")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.312" (5/16")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.187" (3/16")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 0.125" (1/8")
Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard
Diameters machined to 0.0002 inch over the nominal diameter, intended for initial installations
Stainless Steel 18-8

Diameter: 0.062" (1/16")
Length: 1"
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.062" (1/16")
Length: 0.750" (3/4")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.062" (1/16")
Length: 0.625" (5/8")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.062" (1/16")
Length: 0.500" (1/2")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC

Diameter: 0.062" (1/16")
Length: 0.375" (3/8")
Oversized Dowel Pins: This pin has an oversized diameter of 0.0008" and has a minimum surface hardness of 60 HRC