Screws

Thread Diameter - Pitch: 1/2-13
Length: 1"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: 1/2-13
Length: 1 1/4"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: 1/2-13
Length: 1 1/2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: 1/2-13
Length: 2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: 1/2-13
Length: 2 1/2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: 1/2-13
Length: 3 1/2"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: 1/2-13
Length: 4"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: 1/2-13
Length: 3"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: 1/2-13
Length: 5"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: 1/2-13
Length: 6"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 3/4"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 2"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 2 1/4"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 2 1/2"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 2 3/4"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 3"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 3 1/2"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 4 1/2"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 5"

Slotted Head Cap Screws featuring a Slotted Drive
Thread Diameter - Pitch: 1/2-13
Length: 5 1/2"