Screws

Thread Diameter-Pitch: #1-72
Length: 1/8"
Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.

Thread Diameter-Pitch: #1-72
Length: 1/4"
Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.

Thread Diameter-Pitch: #1-72
Length: 1/2"
Head Type: Flat Head 82 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.

Thread Diameter-Pitch: #1-72
Length: 1/8"
Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed.

Thread Diameter-Pitch: #1-72
Length: 1/4"
Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed.

Thread Diameter-Pitch: #1-72
Length: 1/2"
Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed.

Pan Slotted
Machine Screw
Tensile Strength: 12,000 psi.
Shear Strength: 9,600 psi.
Fully Threaded

Pan Slotted
Machine Screw
Tensile Strength: 12,000 psi.
Shear Strength: 9,600 psi.
Fully Threaded

Pan Slotted
Machine Screw
Tensile Strength: 12,000 psi.
Shear Strength: 9,600 psi.
Fully Threaded