Screws

Thread Diameter - Pitch: #2-56
Length: 3/4"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height.

Thread Diameter - Pitch: #2-56
Length: 1/4"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #2-56
Length: 1/2"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #2-56
Length: 5/8"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #2-56
Length: 5/16"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height. Phillips drive is x-shaped for installation with a phillips screw driver.

Thread Diameter - Pitch: #2-56
Length: 3/8"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height. Phillips drive is x-shaped for installation with a phillips screw driver.

Thread Diameter - Pitch: #2-56
Length: 3/4"
The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener above the mating surface is unacceptable. Use a protrusion gage when measuring head height. Phillips drive is x-shaped for installation with a phillips screw driver.

Thread Diameter - Pitch: #2-56
Length: 1/4"
Brass is Anti-Corrosive, Water Resistant and Aesthetically Pleasing

Thread Diameter - Pitch: #2-56
Length: 3/8"
Brass is Anti-Corrosive, Water Resistant and Aesthetically Pleasing

Thread Diameter - Pitch: #2-56
Length: 1/2"
Brass is Anti-Corrosive, Water Resistant and Aesthetically Pleasing

Thread Diameter - Pitch: #2-56
Length: 3/4"
Brass is Anti-Corrosive, Water Resistant and Aesthetically Pleasing

Thread Diameter - Pitch: #2-56
Length: 5/16"
Phillips pan heads have a rounded top, cylindrical sides and a flat bearing surface. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed.

Thread Diameter - Pitch: #2-56
Length: 3/8"
Phillips pan heads have a rounded top, cylindrical sides and a flat bearing surface. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed.

Thread Diameter - Pitch: #2-56
Length: 1/4"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #2-56
Length: 3/8"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #2-56
Length: 1/2"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #2-56
Length: 3/4"
Has a semi-elliptical top surface and a flat bearing surface. Sometimes preferred over pan head for its smooth surface and appearance.

Thread Diameter - Pitch: #2-56
Length: 1/4"
Slotted pan heads have a flat or gently rounded top surface, cylindrical sides and a flat bearing surface. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed. Can be substitutedin most applications for round, truss or binding heads.

Thread Diameter - Pitch: #2-56
Length: 5/16"
Slotted pan heads have a flat or gently rounded top surface, cylindrical sides and a flat bearing surface. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed. Can be substitutedin most applications for round, truss or binding heads.

Thread Diameter - Pitch: #2-56
Length: 3/8"
Slotted pan heads have a flat or gently rounded top surface, cylindrical sides and a flat bearing surface. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used in most situations when general bearing strength is needed. Can be substitutedin most applications for round, truss or binding heads.